Advanced Search


Store Categories

Store Newsletter

Don’t miss another deal. Join
our mailing list for exclusive
offers and updates!

Payment Options

  Home > 2011-2014 Ford Mustang >

JLT Plastic CAI (2011-2014 Ford Mustang GT/BOSS 302) *Tuning Required
JLT Plastic CAI (2011-2014 Ford Mustang GT/BOSS 302) *Tuning Required

List Price: $349.00
Our Price: $299.00
Savings: $50.00

Part Number: JLT-CAI-FMG-11

Transmission Type*:

Air Filter*:

JLT Boss*:

JLT Plastic Cold Air Intake available in Black Textured Plastic or Painted Body Color. Our first intake kit with the MAF housing incorporated into the tube. This makes for a smooth interior and a smooth look to the tube itself. We even took the interior sound tube into consideration. Some want it and some don’t, so we moved it to the inside and center of the tube. A cap is included so you can remove the tube and cap the fitting in the JLT tube. Because we lowered the fitting, when it’s capped it’s less noticeable at most angles looking into the engine compartment. With a huge 4.5” opening on the tube we needed a huge filter. We love the tapered flange design and Powerstack filtered ends of S&B's filters and ended up with a monster 4.5x9” filter. Finish it off with a silicone coupler and stainless clamps and you got the BEST Intake on the market!!!

NO METAL TUBING HERE!! 2012-2013 BOSS 302 owners & 2011 2012 2013 and 2014 GT owners using the BOSS intake manifold: This kit fits as is, but we can include a 2.5” vs. 2” coupler that will improve fit with BOSS manifold. Please select YES in drop down box below if this applies to you and we will swap the 2” coupler for the longer 2.5” coupler at no extra charge.

AUTOMATIC OWNERS Automatic cars need an additional fitting, which we provide if you select automatic when ordering (see below). The fittings are Milled from solid billet aluminum and all you need to do is drill a ½” hole (we show you where) in the tube, install the supplied grommet, fitting and you’re done. Note, all kits sold to resellers will include the automatic fitting.

MOLDED IN MAF It’s a full 107mm ID at the MAF area

HEAT SHIELD Includes new roto molded plastic heat shield to block engine heat at idle and low speed. It incorporates the fresh air inlet from the grill. It uses a large area to make sure the filter has tons of cool air.

•JLT Textured Plastic or Painted Intake Tube •Silicone Coupler •4.5x9 S&B powerstack Air Filter •Roto molded Heat Shield •HD Clamps, 2013-14 hood insert plug & all needed hardware

FINISH OPTIONS Standard finish is an OEM looking black textured plastic and also available in your cars exact body color. All painted tubes receive a special treatment so paint adheres correctly to the plastic and go through an in-depth process to remove all the texture. We then use only the best quality materials to give each tube a smooth gloss finish. Due to cost we do not paint Candy Reds, but we do paint Redfire which is very close. See picture below.

GAINS AND TESTING Up to 30+ RWHP has been seen when used with our custom tune! Our testing as well as many others have showed gains of 24-30 RWHP with our CAI and custom tune. If you see more “claimed” by others, ask them how. Also look over the dyno sheets real good for low number baseline runs or no dyno sheets at all. Many will base line the car with 87 fuel, then add 93 fuel, the CAI and tune and show more power. We don't do that! We test a car with 93 fuel from the start.

TUNING A JLT specific tune is required with this kit. Intake and Tuner package also available: CAI-FMG-11-X4

AIR FILTER OPTIONS OIL OR DRY We use only the best air filters made by S&B to our specifications. For years we only used oiled filters, but dry filter technology has been proven and is now a popular option. Should I choose a Dry Disposable or Cotton Oiled Filter? Since you are not sacrificing performance with either choice, the decision comes down to would you rather throw away the filter or clean it. Dry: Comparable airflow to oiled cotton filters with the same great protection. Last for up to 30,000 miles of highway driving. Extend the life of the filter using compressed air. Oil: Oiled filters can last forever as long as you properly clean and re-oil it. See picture of filters below. Oil filters are available in red or blue and Dry filters are white.

MAINTENANCE To properly clean your oil filter, we recommend the S&B Precision II Cleaning & Oiling Kit. *TIP* by purchasing a 2nd air filter you can simply swap filters when it's time to clean it and not be rushed. Clean the first filter and it's ready when it's time to change again. 2013-14 owners:,

HOW TO install JLT CAI on 2011-14 Mustang GT

Share your knowledge of this product. Be the first to write a review »

Browse for more products in the same category as this item:

2011-2014 Ford Mustang

Copyright © Redline Tuning, All Rights Reserved.  |  Built by OCDesignsonline & Redline Tuning on Volusion platform  |