Our QuickLIFT Systems include quick-release end-fittings on the gas struts for the Jeep models. This allows the user to easily remove the strut from the lower attachment and then place the hood all the way back onto the wind-shield.
- NO MODIFICATIONS TO JEEP
- 5 MINUTE INSTALLATION - Very simple & quick installation
- USES EXISTING MOUNTING LOCATIONS
- TOOLS - 10mm socket and wrench, that's it!
- QUICK-RELEASE - Rod ends have quick-release feature so that you can remove and lay the hood all the back against the windshield.
- LIFTS & HOLDS HOOD without prop rod - just start to lift and let our Hood QuickLIFT System lift and hold up your hood.
✔ JEEP FITMENT (21-20003) This system is designed all Wrangler models that have an Aluminum Hood. Use compatibility list below, or contact us if your vehicle is not listed and has an Aluminum Hood.
COMPATIBLE WITH: 2018 2019 2020 2021 2022 2023 2024 2025 2026 Jeep Wrangler & Gladiator models with (Aluminum hood)
COMPATIBLE WITH: Rugged Ridge Amfib snorkel system
- NOT COMPATIBLE WITH: Jeep Rubicon 392 (USE: 21-20007)
- NOT COMPATIBLE WITH: Jeep Wrangler Mojave models with stock Steel hoods for North American and outside NA delivery (USE: 21-20006)
- NOT COMPATIBLE WITH: Jeep Gladiator models with stock Steel hoods (USE: 21-20006)
- NOT COMPATIBLE WITH: Aftermarket Hoods (USE: 21-20008)
If you have the Wrangler or Gladiator that has a Steel hood, you need a higher force gas springs for the heavier steel hoods put on by Jeep. Purchase the 21-20006 system that we have created specifically for those vehicles. Mojave Edition and all Wrangle/Gladiators outside the US have heavier steel hoods along with various models after 2026.
|
|
|
|
|
|
|
|
|
|
Slip backing plate into slot & align
the bracket vertically until you
can install lower bracket bolt.
|
|
Tuck NVH felt liner on top of bracket,
then tighten down bolts
|
|
Bracket uses existing 10mm bolt,
rests on the fender lip for secure
support of gas strut.
|
|
✔ PRODUCT DESCRIPTION - Redline Tuning Hood QuickLIFT Systems are designed to clean up your engine bay by eliminating your hood prop rod. One-handed operation, simply start to lift the hood and it will rise unassisted in a smooth and controlled motion. Redline Tuning is the worldwide leader in aftermarket Hood QuickLIFT systems since 2002 with hundreds of vehicle-specific applications.
✔
BOLT-IN SYSTEM - This Hood QuickLIFT System is designed and engineered to use existing locations for our vehicle-specific mounting hardware.
✔
QuickLIFT PLUS (ALL BLACK SYSTEM) - All of our installation hardware is designed to last and we spare no expense on the details. First, we zinc plate all steel-mounting hardware, then each bracket is also black powder coated for the ultimate in corrosion protection. QuickLIFT PLUS includes black gas springs. There is a four-year warranty on all QuickLIFT PLUS components.
✔
BLACK GAS SPRINGS - The gas springs used in this application each have a black e-coated steel body with black annealed extending rod. The end-fittings used are designed specifically for this application. Gas strut orientation is always body end up (large tube attaching to hood bracket) and extending rod attaches to lower ball stud.
✔
PROGRESSIVE-RATE GAS SPRINGS - Redline Tuning gas springs are not off-the-shelf parts, they are designed by us and manufactured to our specifications for each vehicle application. Our exclusive end-of-stroke dampening slows the rate of extension over the final inches of travel eliminating stress to the hood.
✔
QUICK-RELEASE ENDS - Both lower strut attachments include a quick-release mechanism that allows the hood to be released from the gas struts. This allows the user to easily remove the gas strut from the lower attachment and rest hood on the windshield of your Jeep as if the struts were not installed. Simply snap them back on to utilize your Hood QuickLIFT System.
✔
WHY BUY FROM REDLINE TUNING? Our products are designed and manufactured in the USA. We are located in Ann Arbor, Michigan and are global leaders in Hood QuickLIFT systems with hundreds of vehicle-specific applications. We design all of our own components using CATIA CAD software. We are committed to providing excellent customer support and are available by phone or email to solve any issue you have. If there is a problem, we will quickly make it right as the customer is our #1 priority.
