Replace your hood's prop rod today with our Redline Tuning Hood QuickLIFT system. Progressive gas springs will lift and hold your hood without the need for a poorly placed prop-rod, simply start to lift your hood and let our QuickLIFT system take over. Our Jeep Gladiator Hood QuickLIFT system is simply the best on the market. Our design is entirely bolt-in and will take only a five minutes to install using only a 10mm socket. We use existing mounting locations on the vehicle for the QuickLIFT system's lifting action.
This system includes Quick-release end-fittings on the gas struts. This allows the user to easily remove the strut from the lower attachment and then place the hood all the way back onto the wind-shield. Just snap strut back in place when done and the system will then work as intended.
- NO MODIFICATIONS TO JEEP
- 5 MINUTE INSTALLATION - Very simple & quick installation
- USES EXISTING MOUNTING LOCATIONS
- TOOLS - 10mm socket and wrench, that's it!
- QUICK-RELEASE - Rod ends have quick-release feature so that you can remove and lay the hood all the back against the windshield.
- LIFTS & HOLDS HOOD without prop rod - just start to lift and let our Hood QuickLIFT System lift and hold up your hood.
FITMENT: Our Jeep Wrangler & Gladiator Hood QuickLIFT PLUS system is designed to fit Jeep 2018+ Wrangler JL & 2020+ Gladiator JT Mojave and ALL non-North American models: 2018 2019 2020 2021 2022 2023 2024.
✔ JEEP FITMENT (21-20006) - This system is designed specifically for the Jeep Gladiator Mojave edition and Jeep Wrangler/Gladiator models delivered outside North America with stock steel hoods, fits model years: 2018 2019 2020 2021 2022 2023 2024. The gas springs have a higher force due to the heavier steel hood (North American models feature Aluminum hoods).
COMPATIBLE WITH: Rugged Ridge Ambfib snorkel system
- NOT COMPATIBLE WITH: Jeep Rubicon 392 (USE: 21-20007)
- NOT COMPATIBLE WITH: Jeep Wrangler models with stock hoods for North American delivery (USE: 21-20003)
- NOT COMPATIBLE WITH: Aftermarket Hoods (USE: 21-20008)
- NOT COMPATIBLE WITH: Jeep Gladiator models with stock hoods for North American delivery (USE: 21-20003)
- NOT COMPATIBLE WITH: Aftermarket Hoods (USE: 21-20008)
✔ PRODUCT DESCRIPTION - Redline Tuning Hood QuickLIFT Systems are designed to clean up your engine bay by eliminating your hood prop rod. One-handed operation, simply start to lift the hood and it will rise unassisted in a smooth and controlled motion. Redline Tuning is the worldwide leader in aftermarket Hood QuickLIFT systems since 2002 with hundreds of vehicle-specific applications.
✔ BOLT-IN SYSTEM - This Hood QuickLIFT System is designed and engineered to use existing locations for our vehicle-specific mounting hardware.
✔ QuickLIFT PLUS (ALL BLACK SYSTEM) - All of our installation hardware is designed to last and we spare no expense on the details. First, we zinc plate all steel-mounting hardware, then each bracket is also black powder coated for the ultimate in corrosion protection. QuickLIFT PLUS includes black gas springs. There is a four-year warranty on all QuickLIFT PLUS components.
✔ BLACK GAS SPRINGS - The gas springs used in this application each have a black e-coated steel body with black annealed extending rod. The end-fittings used are designed specifically for this application. Gas strut orientation is always body end up (large tube attaching to hood bracket) and extending rod attaches to lower ball stud.
✔ PROGRESSIVE-RATE GAS SPRINGS - Redline Tuning gas springs are not off-the-shelf parts, they are designed by us and manufactured to our specifications for each vehicle application. Our exclusive end-of-stroke dampening slows the rate of extension over the final inches of travel eliminating stress to the hood.
✔ QUICK-RELEASE ENDS - Both lower strut attachments include a quick-release mechanism that allows the hood to be released from the gas struts. This allows the user to easily remove the gas strut from the lower attachment and rest hood on the windshield of your Jeep as if the struts were not installed. Simply snap them back on to utilize your Hood QuickLIFT System.
✔ WHY BUY FROM REDLINE TUNING? Our products are designed and manufactured in the USA. We are located in Ann Arbor, Michigan and are global leaders in Hood QuickLIFT systems with hundreds of vehicle-specific applications. We design all of our own components using CATIA CAD software. We are committed to providing excellent customer support and are available by phone or email to solve any issue you have. If there is a problem, we will quickly make it right as the customer is our #1 priority.
