Home > Klassic Power Door Locks >

Klassic Keyless Power Door Lock Add-On Hardware Kit for GM B-Body 2 Door (1961-1964)

Klassic Keyless Power Door Lock Add-On Hardware Kit for GM B-Body 2 Door (1961-1964)
 
List Price: $249.95
Price: $179.95
Savings: $70.00



Availability: Usually Ships in 24 to 48 Hours
Part Number: KK-06-01202-22
Qty:

Description
 
1961-64 General Motors B-Body 2 Door Power Door Lock Kit

Buick:
Wildcat, Electra 225, Le Sabre
Chevrolet: Bel Air, Biscayne, Caprice, Impala
Oldsmobile: 98, Delmont 88, Delta 88, Dynamic 88, JetStar, Starfire
Pontiac: Bonneville, Catalina, 2+2, Executive, Grand Prix, Star Chief
1961, 1962, 1963, 1964


Add-on Power Door Locks for your classic car

This kit DOES NOT include any control module, keyless entry brain and remotes, or power door lock switches

Klassic Keyless has engineered this system to work in conjunction with your existing aftermarket alarm, remote start, or push button start system.
This includes everything needed to add power door locks to the alarm of your choice.
It can also be used as a factory style power lock system using owner supplied door lock switches.

Power Door Lock system Includes:
Prewired relay pack
(2) Door lock actuators with 15 lbs. of pulling force & built-in overload protection
(2) Actuator mounting brackets
(2) Rubber door jamb boots
(2) Actuator connecting rods and clips, wire harness, full color step by step instruction manual, and all necessary hardware.

Power Trunk Release (Purchase 06-01202-23)

OPTIONAL FULL VEHICLE KEYLESS (INCLUDING TRUNK - 06-01202-23): In addition to the parts listed above, you will also receive: 1 Power trunk latch, wire and wire loom, full color step by step instruction manual, trimming template, and all necessary hardware. Our Power Trunk Latch option allows you to be able to open the trunk by using the keyless entry remote but also retains the factory lock cylinder and key operation. This kit comes with everything needed to replace your factory manual trunk latch with our upgraded power latch and hook it up to your new keyless entry system. Please note that some vehicles do require the installer to trim some metal to enlarge the opening for the new power latch. This trimming does not affect the mounting of the original latch should you decide to reinstall it in the future. In addition to the tools shown above, you may need a die grinder and metal burr to enlarge the hole for installation.

Share your knowledge of this product. Be the first to write a review »

Browse for more products in the same category as this item:

Klassic Power Door Locks