 |
Included - 1 pair of 360 degree swivel end-fittings, used on applications where the gas spring lifts beyond 30 degrees to the ball-stud. These are ABS plastic with a black slide-lock retainers.
Question: I installed my QuickLIFT system and when I closed the hood, the strut popped off of the ball stud?
Answer: This end-fitting (72-00001) has sliding lock on it, orientation of this lock is key to proper function of the system. In every case where this end-fitting is used, the lock MUST BE ON TOP when the hood is in the closed position. In other words, while you lower the hood, the lock cannot be spun around and aim toward the vehicle, it needs to aiming upward toward the hood. If installed downward, the sliding lock will release itself when the hood is closed as it runs into the ball-stud, releasing itself. If this has happened, you have likely lost the sliding lock (part of the end-fitting) and you will need a new end-fitting (72-00001)
- (2) 360 degree swivel ABS ball stud end-fittings
Made from tough ABS plastic
Slide locks to retain ball-stud
|
|
|
